![]() The "ibmpc" did not work at all as it had pin02=nc and pin34=chg. ![]() The problem in my case was that all posts on the net claimed that it is enough to select "shugart" or "ibmpc" and I am ok. The log produces a file called FFLOG.TXT to the USB drive. Once everything works you can flast the original firmware again to get back to normal. After you have added the logfile then the startup is no longer FF but Lo. It will tell in real text what the GOTEK is doing. The other could be (nc, chg or dens).Ī good extra tool is to also install the log-firmware from /apt/log. My guess is that you need to assign rdy to (pin02 or pin34) to get it to work. Values: auto, nc, low, high, rdy, nrdy, dens, ndens, chg, nchg Here I was trying out different options for days until I found out that the only thing I needed to do was to change two variables:Īfter these changes my Roland E96 was able to read/write both 720k and 1.44m floppy images correctly. Don't change anything in this FF.CFG file (except the signal usage pin02, pin34) Then create a file FF.CFG that resides in the root directory of the USB stick. It does not matter what is in these files as you want to let Yamaha format it. Then create an image of exactly 737280 bytes or 1474560. Plus follow the directions in how to install the firmware. You could start by flashing the lates firmware from flashfloppy to the GOTEK. Today we have a generic firmware that works with all GOTEK hosts. The operations are defined in the firmware. There is no difference between an AMIGA GOTEK and a Yamaha GOTEK. ![]() While I don't know much about the Yamaha I am pretty experienced by troubleshooting the GOTEK at this time.Īll the GOTEK drives are equal. I just went through a two days session trying to find out why my Roland E96 never worked with a GOTEK drive. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |